Installation Guide

REMOVE SPRUES FROM THE SIDEWALLS IF ANY.

8-1
1

1

Select area for application

Select a suitable area as per your decal size. Select area which is comparatively smoother ( with minimum markings)

2

2

Wash with soap and brush

Wash the selected area with soap and brush thoroughly. Repeat the process 2 or 3 times until all the dirt is removed from the tyre.

3

3

Rub with tyre cleaner

Now apply tyrevogue tyre cleaner on a cloth and wipe the selected area until no oil and dirt is picked up.

step 2 & 3 are Important for Perfect bondid

4

Apply adhesive.

Apply the tyrevogue-adhesive on the back of the decals. Spread the adhesive evenly. Apply a very thin layer of adhesive, extra adhesive might affect the bonding Strength. For clean application, apply adhesive to 2 or 3 decals at a time.

4

5

Apply pressure on decals

Now press the decals against the tyre with moderate pressure and hold. Be sure of pressing the decal from all sides and edges for perfect bonding.

5

6

Allow decal to cure

Allow the decal to cure for a while and carefully remove the tape. Look out if any decal is not stuck properly, apply adhesive if needed.

6

7

Once fully applied, allow the decals to cure for a minimum of 6 hours or overnight.

7